Physics & Computation#

The analytical solutions#

Permanent Magnets

Magnetic field computations in Magpylib are based on known analytical solutions (formulas) to permanent magnet and current problems. For Magpylib we have used the following references:

  • Field of cuboid magnets: [Yang1999, Engel-Herbert2005, Camacho2013, Cichon2019]

  • Field of cylindrical magnets: [Furlani1994, Derby2009, Caciagli2018, Slanovc2021]

  • Field of facet bodies: [Janssen2009, Rubeck2013]

  • Field of circular line current: [Smythe1950, Simpson2001, Ortner2017]

  • all others derived by hand

A short reflection on how these formulas can be achieved: In magnetostatics (no currents) the magnetic field becomes conservative (Maxwell: \(\nabla \times {\bf H} = 0\)) and can thus be expressed through the magnetic scalar potential \(\Phi_m\):

\[ {\bf H} = -\nabla\cdot\Phi_m \]

The solution to this equation can be expressed by an integral over the magnetization distribution \({\bf M}({\bf r})\) as

\[ \Phi_m({\bf r}) = \frac{1}{4\pi}\int_{V'}\frac{\nabla'\cdot {\bf M}({\bf r}')}{|{\bf r}-{\bf r}'|}dV'+\frac{1}{4\pi}\oint_{S'}\frac{{\bf n}'\cdot {\bf M}({\bf r}')}{|{\bf r}-{\bf r}'|}dS' \]

where \({\bf r}\) denotes the position, \(V\) is the magnetized volume with surface \(S\) and normal vector \({\bf n}\) onto the surface. This solution is derived in detail e.g. in [1999Jackson].

Currents

The fields of currents are directly derived using the law of Biot-Savart with the current distribution \({\bf J}({\bf r})\):

\[ {\bf B}({\bf r}) = \frac{\mu_0}{4\pi}\int_{V'} {\bf J}({\bf r}')\times \frac{{\bf r}-{\bf r}'}{|{\bf r}-{\bf r}'|^3} dV' \]

In some special cases (simple shapes, homogeneous magnetizations and current distributions) the above integrals can be worked out directly to give analytical formulas (or simple, fast converging series). The derivations can be found in the respective references. A noteworthy comparison between the Coulombian approach and the Amperian current model is given in [Ravaud2009].

Accuracy of the Solutions and Demagnetization#

Line currents:

The magnetic field of a wire carrying a homogeneous current density is similar (ON THE OUTSIDE ONLY) to the field of a line current in the center of the wire, which carries the total current of the wire. Current distributions become inhomogeneous at bends of the wire or when eddy currents (finite frequencies) are involved.

Magnets and Demagnetization

The analytical solutions are exact when bodies have a homogeneous magnetization. However, real materials always have a material response which results in an inhomogeneous magnetization even when the initial magnetization is perfectly homogeneous. There is a lot of literature on such demagnetization effects.

Modern high grade permanent magnets (NdFeB, SmCo, Ferrite) have a very weak material responses (local slope of the magnetization curve, remanent permeability) of the order of \(\mu_r \approx 1.05\). In this case the analytical solutions provide an excellent approximation with less than 1% error even at close distance from the magnet surface. A detailed error analysis and discussion is presented in the appendix of [Malago2020].

Error estimation as a result of the material response is evaluated in more detail in the appendix of Malagò2020.

Demagnetization factors can be used to compensate a large part of the demagnetization effect. Analytical expressions for the demagnetization factors of cuboids can be found at magpar.net.

Soft-Magnetic Materials

Soft-magnetic materials like iron or steel with large permeabilities \(\mu_r \sim 1000\) and low remanence fields are dominated by the material response. There are no useful analytical solutions. However, recent developments showed that the Magnetostatic Method of Moments can be a powerful tool in combination with Magpylib to compute such a material response. An integration into Magpylib is planned for the future.

Units and scaling property#

Magpylib uses the following physical units:

  • [mT]: for the B-field and the magnetization (µ0*M).

  • [kA/m]: for the H-field.

  • [mm]: for position and length inputs.

  • [deg]: for angle inputs by default.

  • [A]: for current inputs.

However, the analytical solutions scale in such a way that the magnetic field is the same when the system scales in size. This means that a 1-meter sized magnet in a distance of 1-meter produces the same field as a 1-millimeter sized magnet in a distance of 1-millimeter. The choice of position/length input dimension is therefore not relevant - the Magpylib choice of [mm] is a result of history and practical considerations when working with position and orientation systems.

In addition, getB returns the unit of the input magnetization. The Magpylib choice of [mT] (theoretical physicists will point out that it is µ0*M) is historical and convenient. When the magnetization is given in [mT], then getH returns [kA/m] which is simply related by factor of \(\frac{10}{4\pi}\). Of course, getB also adds the magnet magnetization when computing the field inside the magnet, while getH does not.

Computation and Performance#

Magpylib code is fully vectorized, written almost completely in numpy native. Magpylib automatically vectorizes the computation with complex inputs (many sources, many observers, paths) and never falls back on using loops.

Note

Maximal performance is achieved when .getB(sources, observers) is called only a single time in your program. Try not to use loops.

The objective oriented interface comes with an overhead. If you want to achieve maximal performance this overhead can be avoided with Direct interface and core.

The analytical solutions provide extreme performance. Single field evaluations take of the order of 100 µs. For large input arrays (e.g. many observer positions or many similar magnets) the computation time drops below 1 µs per evaluation point on single state-of-the-art x86 mobile cores (tested on Intel Core i5-8365U @ 1.60GHz), depending on the source type.

Numerical stability#

Many expressions provided in the literature have very questionable numerical stability. Most of these issues are fixed in Magpylib, but one should be aware that the results might not have more than 8-10 correct significant figures. A detailed treatsie on this topic is work in progress.

References

  • [Yang1999] Z. J. Yang et al., “Potential and force between a magnet and a bulk Y1Ba2Cu3O7-d superconductor studied by a mechanical pendulum”, Superconductor Science and Technology 3(12):591, 1999

  • [Engel-Herbert2005] R. Engel-Herbert et al., Journal of Applied Physics 97(7):074504 - 074504-4 (2005)

  • [Camacho2013] J.M. Camacho and V. Sosa, “Alternative method to calculate the magnetic field of permanent magnets with azimuthal symmetry”, Revista Mexicana de Fisica E 59 8–17, 2013

  • [Cichon2019] D. Cichon, R. Psiuk and H. Brauer, “A Hall-Sensor-Based Localization Method With Six Degrees of Freedom Using Unscented Kalman Filter”, IEEE Sensors Journal, Vol. 19, No. 7, April 1, 2019.

  • [Furlani1994] E. P. Furlani, S. Reanik and W. Janson, “A Three-Dimensional Field Solution for Bipolar Cylinders”, IEEE Transaction on Magnetics, VOL. 30, NO. 5, 1994

  • [Derby2009] N. Derby, “Cylindrical Magnets and Ideal Solenoids”, arXiv:0909.3880v1, 2009

  • [Caciagli2018] A. Caciagli, R. J. Baars, A. P. Philipse and B. W. M. Kuipers, “Exact expression for the magnetic field of a finite cylinder with arbitrary uniform magnetization”, Journal of Magnetism and Magnetic Materials 456 (2018) 423–432.

  • [Slanovc2022] F. Slanovc, M. Ortner, M. Moridi, C. Abert and D. Suess, “Full analytical solution for the magnetic field of uniformly magnetized cylinder tiles”, submitted to Journal of Magnetism and Magnetic Materials.

  • [Smythe1950] W.B. Smythe, “Static and dynamic electricity” McGraw-Hill New York, 1950, vol. 3.

  • [Simpson2001] J. Simplson et al., “Simple analytic expressions for the magnetic field of a circular current loop,” 2001.

  • [Ortner2017] M. Ortner et al., “Feedback of Eddy Currents in Layered Materials for Magnetic Speed Sensing”, IEEE Transactions on Magnetics ( Volume: 53, Issue: 8, Aug. 2017)

  • [Janssen2009] J.L.G. Janssen, J.J.H. Paulides and E.A. Lomonova, “3D ANALYTICAL FIELD CALCULATION USING TRIANGULAR MAGNET SEGMENTS APPLIED TO A SKEWED LINEAR PERMANENT MAGNET ACTUATOR”, ISEF 2009 - XIV International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering Arras, France, September 10-12, 2009

  • [Rubeck2013] C. Rubeck et al., “Analytical Calculation of Magnet Systems: Magnetic Field Created by Charged Triangles and Polyhedra”, IEEE Transactions on Magnetics, VOL. 49, NO. 1, 2013

  • [Jackson1999] J. D. Jackson, “Classical Electrodynamics”, 1999 Wiley, New York

  • [Ravaud2009] R. Ravaud and G. Lamarquand, “Comparison of the coulombian and amperian current models for calculating the magnetic field produced by radially magnetized arc-shaped permanent magnets”, HAL Id: hal-00412346

  • [Malago2020] P. Malagò et al., Magnetic Position System Design Method Applied to Three-Axis Joystick Motion Tracking. Sensors, 2020, 20. Jg., Nr. 23, S. 6873.